







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Carrollton Homeowners Choose PGT Construction
We provide independent PGT window and door service in Carrollton – installation, replacement, repair, and the drainage work that keeps impact-rated units performing through North Texas storms. What makes our PGT work different is that we read PGT’s own product literature, source factory hardware and glass profiles, and solve the rough-opening and weep-system problems that show up in Carrollton homes. We’re not tied to PGT, so you get a straight answer on repair versus replacement instead of a sales pitch.
To be clear about where we stand: Construction Carrollton is an independent PGT service provider. We are not manufacturer-authorized, sponsored, or warranty-endorsed by PGT. That independence is the point. We work on impact-rated assemblies every week, we know how they age in Texas heat and hail, and we tell homeowners plainly when a unit should be repaired and when it genuinely needs to come out.
Carrollton is a city where most window and door work happens on existing homes, not new construction. The housing stock runs from 1970s-1990s brick-veneer single-family homes to early Planned Development townhome clusters, and the older central and southern sections near Josey Ranch and the original downtown square carry the builds most likely to need attention around the openings. Windows and doors are where that shows up first.
Why Trust Construction Carrollton for Your PGT Construction?

Our technicians have up to 14 years of experience, and much of that time has been spent on impact-rated window and door systems – reading the profiles, matching hardware, and diagnosing the failures that come from years of sun, storm, and clay-soil movement.
PGT products are engineered assemblies, not just panes in a frame. An impact-rated sliding door is a rated system: the glass interlayer, the frame profile, the rollers, the pile weatherstrip, the meeting stile, and the perimeter seal all have to work together to hold the rating and keep water out. When you replace one piece of that system with something that doesn’t match, you can quietly undo the performance of the whole unit. That’s why we source quality parts that fit PGT equipment specifically, and why we match the rated assembly rather than substituting whatever is closest on a shelf.
We also work warranty-safe. That means we don’t dismantle a unit in ways that compromise the frame, we document what we find, and we’re upfront when a repair we can do will interact with a manufacturer warranty you may hold. Because we are not a PGT dealer and not authorized by PGT, we can’t process a PGT warranty claim for you – but we can tell you honestly whether what you’re seeing is likely a warranty matter or ordinary wear, so you know which door to knock on.
Carrollton sits on North Texas expansive clay soils, and hot dry summers with periodic heavy rain push hard on window and door seals. That combination is exactly what our PGT work here is built around.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Carrollton
PGT impact products fail in predictable ways, and knowing the pattern saves homeowners from replacing units that only need service. Here’s what we see most often.
- Failed or hardened weatherstrip and pile seals on sliding-glass doors. The pile and weatherstrip around the meeting stile harden with years of Texas sun and stop sealing. You feel a draft, hear wind whistle, or notice fine dust and moisture collecting along the meeting stile. It’s a seal problem, not a frame problem, and it usually traces straight to age and UV exposure rather than anything structural.
- Roller and track wear on heavy impact-rated sliding doors. Impact panels are heavy, and the rollers carry that weight for years. When they flatten or the track collects grit, the panel drags, jumps the track, or stops latching cleanly. A door that won’t latch is also a door that won’t seal, so this one compounds if it’s left alone.
- Seal or interlayer haze and bubbling on older impact laminated glass. After years of sun exposure, the laminated interlayer in older impact glass can haze or bubble at the edges. It looks like a cloudy film that won’t clean off. The glass hasn’t necessarily failed structurally, but the rating needs to be verified, and that’s a judgment call we make on site.
- Perimeter sealant and weep-system breakdown at the rough opening. This is the one homeowners miss. The sealant and weep path at the rough opening are what move water back outside during a hard storm. When they break down, water finds its way in and you see staining on the interior jamb or drywall – often not at the window itself, which is why people blame the glass first.
- Out-of-square frames following slab movement. Carrollton’s expansive clay soils move, and a frame that goes out of square binds the panel and stresses the seals. When the frame itself is the problem, repair has limits – this is where honest replacement advice matters.
A typical job goes like this: a homeowner notices a PGT WinGuard sliding door dragging and not sealing tightly, often with water staining on the interior jamb after a storm. The usual causes are worn rollers and pile weatherstrip plus a compromised perimeter seal at the rough opening. A qualified local pro pulls the panel, replaces rollers and weatherstrip, verifies the weep path, re-seals the perimeter, and checks the glass for interlayer haze so the impact rating is still intact. That sequence – diagnose the seal and the drainage before you price a window – is the whole job in a nutshell.
PGT Parts & Our Repair-vs-Replace Approach

We source OEM PGT hardware, rollers, weatherstrip, and replacement glass where the profile is still supported, and we use matched aftermarket impact components only when OEM is discontinued – always matching the rated assembly so the unit keeps performing as designed. We don’t stock or carry PGT parts on shelves, and we’re not a PGT dealer; what we do is source correctly for the unit in front of us.
How we decide repair versus replace comes down to a few honest questions. Is the frame sound and square? Is the glass clear of interlayer failure? Can the impact rating still be verified? When the frame and glass are good, repair is usually the right call – rollers, weatherstrip, and perimeter sealing bring a unit back without touching the rated glass. Full replacement makes more sense when the impact rating can no longer be verified or the frame has gone out of square and can’t be brought back. Because we’re independent, we have no reason to lean one way or the other.
If a PGT unit in your Carrollton home is dragging, leaking, or fogging, call (888) 584-9525. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit as a rated assembly – glass interlayer condition, frame square, rollers and track, pile and weatherstrip at the meeting stile, and the perimeter sealant and weep path at the rough opening. We note what’s wear and what’s structural so the recommendation is grounded in what the unit is actually doing.
- 2
Repair or install. For repairs, we pull the panel, replace the failed components with parts that fit the PGT profile, re-seal the perimeter, and confirm the weep system moves water out the way it should. For installations, we set the unit true in the opening, seal and flash the rough opening, and confirm drainage before finishing.
- 3
Test. We operate the door or window through its full range – check the latch, the seal at the meeting stile, and the water path. Where the impact rating matters, we confirm the rated assembly is intact before we call it done.
- 4
Warranty clarity. We hand over a plain explanation of what we did and what it means for any manufacturer warranty you may hold. Since we’re independent and not PGT-authorized, we’re clear about which items a PGT claim might cover and which are ordinary service.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Carrollton
We service and install PGT impact-rated window and door systems, including PGT WinGuard Aluminum Impact-Resistant windows and doors, PGT WinGuard Vinyl impact windows, PGT Architectural Series aluminum impact-rated products, and PGT PremierVue and PGT Vinyl single-hung and sliding-glass configurations. Much of our work centers on sliding-glass doors and the drainage and sealing that keep them performing. We’re an independent service resource: we don’t claim to stock PGT products, and we’re not a PGT dealer. What we do is install, replace, and repair these systems correctly for Carrollton homes, with the roof and exterior work around them handled by the same team when a storm has touched more than one opening. Start your window and door material consultation and we’ll walk you through what your units actually need.
We Also Service These Brands
PGT is one part of a broader material portfolio. We work with KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems, and Master Halco fencing, among 50+ vetted manufacturer brands across our service lines. That range means one contractor can handle your windows and doors alongside the remodel, roof, or exterior that surrounds them, and you’re never boxed into a single brand when a better fit exists.
FAQs – PGT Construction Service in Carrollton

No. Construction Carrollton is an independent PGT service provider and is not manufacturer-authorized, sponsored, or warranty-endorsed by PGT. We install, repair, and service PGT systems using our own expertise and parts that fit them.
Yes. We source OEM PGT hardware, rollers, weatherstrip, and replacement glass where the profile is still supported, and matched aftermarket impact components only when OEM is discontinued – always matching the rated assembly. We don’t stock or carry PGT parts, and we’re not a PGT dealer.
Most repairs – rollers, weatherstrip, and perimeter re-sealing – are a service visit. Installations run longer, and it depends on the number of openings and the condition of the rough openings. We give you the schedule in the written estimate before any work begins.
Impact-rated windows and doors, including PGT WinGuard Aluminum Impact-Resistant windows and doors, PGT WinGuard Vinyl impact windows, PGT Architectural Series, and PGT PremierVue and PGT Vinyl single-hung and sliding-glass configurations. Sliding-glass doors and their drainage are a large share of our PGT work in Carrollton.
Proper service performed on a sound frame shouldn’t void a manufacturer warranty, but since we’re not PGT-authorized we can’t process a claim for you, and we tell you honestly what’s likely a warranty issue versus ordinary wear. We work warranty-safe and document what we find.
Typical estimated ranges for the most common PGT work in Carrollton:
| Service | Typical Estimated Range |
|---|---|
| Impact Window Installation | $8000 – $25000 |
| Window Replacement | $4500 – $15000 |
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
These are estimates, and the written estimate sets the final price. Call (888) 584-9525 for an exact quote – estimates are free.
Often yes. Where the PGT profile is still supported we source OEM PGT hardware and glass; where it’s discontinued we use matched aftermarket impact components that match the rated assembly. Call (888) 584-9525 and we’ll tell you what’s available for your unit.
Not necessarily. Haze or bubbling at the edges is usually the laminated interlayer aging under years of Texas sun, not a structural glass failure. It does mean the impact rating should be verified on site before you assume the unit has to go. Call (888) 584-9525 to schedule an inspection.
It can, if the replacement doesn’t match the rated assembly – the glass, frame profile, and hardware have to work as a system. We match components to keep the rated assembly intact and verify it before we call the job done.
Carrollton sees hail and wind storms every spring, and impact-rated glass protects against storm-driven debris and breakage during those events. Whether it’s required for your specific project depends on your scope and the city’s permitting requirements – ask your city’s building department, and we’ll walk you through the options.
Repair is usually right when the frame and glass are sound and the leak traces to worn rollers, weatherstrip, or a perimeter seal. Replacement makes sense when the frame is out of square or the impact rating can’t be verified. Call (888) 584-9525 – estimates are free.
Book Your PGT Service in Carrollton, TX
If a PGT window or door in your Carrollton home is dragging, leaking, hazing, or simply not sealing the way it should, we’ll diagnose it as the rated assembly it is and tell you honestly whether it needs repair or replacement. Call (888) 584-9525. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the price.
Written by the team at Construction Carrollton.












