







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Carrollton Homeowners Choose Kohler Construction
We provide independent Kohler construction service in Carrollton, TX. That means we install, retrofit, and repair Kohler toilets, tubs, faucets, and shower bases with genuine familiarity for how these fixtures are built and how they fail, not with a dealer’s sales agenda. Most Kohler work in Carrollton comes down to three things: cast iron, vitreous china, and Vibrant finish. When your Kohler Memoirs toilet won’t stop running or your Purist faucet drips at the spout, the fix is usually a wear part, not a new bathroom.
One honest point up front: we are an independent service provider. Construction Carrollton is not affiliated with, authorized by, or endorsed by Kohler. We don’t sell Kohler product lines or claim factory certification. Our credibility rests on years of installing and repairing Kohler fixtures in North Texas homes and bathrooms.
Carrollton is fully built out. Most of our Kohler work here happens inside 1970s and 1980s slab-on-grade bathrooms in the older central and southern sections near the downtown square and Josey Ranch. That changes the job. Call (888) 584-9525. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Carrollton for Your Kohler Construction?

Our technicians have up to 14 years of experience working with Kohler fixtures, and that experience shows up in the details that generic installers miss. Kohler builds toilets, tubs, shower bases, and faucets with very specific tolerances. A Memoirs one-piece toilet sits on a particular rough-in. An Underscore tub needs the right support under the base or it flexes. A Purist widespread faucet has a ceramic cartridge that has to seat cleanly or it drips. Get any of those wrong and you’ll be back under the sink in a year.
We use quality parts that fit Kohler equipment rather than forcing a universal part to work. When we install a new Kohler shower base or vanity faucet, we install it to the manufacturer’s spec so the finish and fit hold up. We read the installation instructions. We check the rough-in dimensions. We confirm clearances before we cut anything.
We also write a line-item estimate before any work starts, so you know exactly what’s being installed, what’s being repaired, and what the price is. The written estimate sets the final price.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Carrollton
Kohler fixtures fail in patterns. Knowing those patterns is how we fix them once instead of twice. Here’s what we see most often in Carrollton bathrooms.
- Memoirs one-piece toilets that run or refill slowly. The fill valve seal gets mineral buildup from North Texas water, or the flapper sits slightly off its seat after a bump. The toilet keeps running, your water bill creeps up, and you hear it re-fill at odd hours. This is almost never a supply-line problem. It’s the fill valve or the flapper, and both are wear parts.
- Vibrant PVD finishes spotting or wearing near the aerator. Vibrant Brushed Moderne Brass and other Vibrant PVD finishes are durable, but abrasive cleaners and acidic bathroom sprays strip the clear layer around the aerator where water pools. The finish dulls in a ring. Once the PVD layer is compromised it can’t be buffed back to factory fresh, which is why we recommend pH-neutral soap and water on these faucets.
- Underscore and Archer acrylic tubs flexing or cracking. Acrylic tubs need solid support under the base. In Carrollton slab-on-grade homes where a tub was set on a thin mortar bed or directly on the slab, the base flexes over time. Flexing leads to hairline cracks at the drain or near the overflow. If the floor support is wrong, a new tub will fail the same way.
- Cast-iron shower receptors with a failing drain gasket or cracked enamel. A cast-iron base is heavy and long-lasting, but the drain gasket and the seal around the tile flange age. Water gets behind the flange, enamel cracks, and moisture sits under the receptor. That’s a real problem in slab homes because you can’t see it until the floor or ceiling below tells you.
- Slow drains and gurgling tied to older cast-iron drain lines. Many central Carrollton homes still have cast-iron drain lines under the slab. When a bathroom remodel exposes them, we sometimes find corrosion or a failing joint that has nothing to do with the Kohler fixture itself. That’s a job most homeowners don’t anticipate, and it’s worth knowing before your remodel starts.
Kohler Parts & Our Repair-vs-Replace Approach

We choose parts that fit your Kohler fixture and preserve its fit and finish. We are not a Kohler dealer and we don’t stock OEM Kohler parts. What we do is source the correct Kohler OEM fill valve, flapper, or faucet trim kit for your model whenever it’s available, because aftermarket parts often don’t match the seat geometry or finish. Aftermarket is acceptable only for non-critical seals where OEM has been discontinued.
The repair-or-replace question comes down to three things: age, the material, and parts availability. On Kohler fixtures over 15 years old with cracked cast iron or failing PVD, honest guidance usually points toward replacement. One-piece toilets are the clearest case. Parts availability drops as the model ages, and a repair that buys you two years isn’t worth the labor. On a faucet or a fill valve with a matching OEM part, repair is almost always the better answer.
We’ll tell you which way we lean and why. Call (888) 584-9525 for a free estimate.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We shut off the angle stop and confirm the exact Kohler model and finish before touching anything. On a Memoirs toilet, that means checking the fill valve, flapper, and the flange for movement. On a Purist faucet, we test the ceramic cartridge for a clean seat and check the aerator for buildup.
- 2
Repair or install. We install the OEM fill valve, cartridge, or trim kit and torque to spec. On a new Kohler walk-in shower base or Underscore tub, we verify the rough-in and the subfloor support before setting the base. On a vanity install, we confirm the drain alignment and the faucet rough-in before the countertop goes down.
- 3
Test. We run water, cycle the flush, and check the shower pan and toilet flange for movement or moisture. We watch for a slow refill, a drip at the spout, or water behind a tile flange. If something’s off, we fix it before we leave.
- 4
Warranty review. We explain what’s covered by the installation and what’s tied to Kohler’s own warranty on the fixture. We don’t register anything on your behalf without your say-so, and we document what we did.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Carrollton
We service and install the full range of Kohler bathroom fixtures you’d find in a Carrollton home. That includes Memoirs and Devonshire toilet suites in one-piece and two-piece configurations, Archer and Underscore soaking tubs, and Kohler shower bases. We also work with Purist and Artifacts widespread faucets and Iron/Impressions cast-iron shower receptors and tile-in bases. If you’re converting a tub to a shower, we handle the Kohler walk-in shower base install and the surrounding tile. If you’re replacing a vanity, we install Kohler faucets on new cabinetry and confirm the rough-in before the countertop goes in. If the fixture is outside the Kohler family, we still service it, because we work across Moen, Grohe, Toto, and American Standard as well.
We Also Service These Brands
We’re not tied to one brand. Alongside Kohler, we service and install KraftMaid cabinetry, GAF roofing systems, PGT windows, and Master Halco fencing. If your remodel touches more than the bathroom, that matters. One contractor can handle the Kohler vanity and faucet, the KraftMaid cabinets, and the exterior work without handing you off to three different trades.
FAQs – Kohler Construction Service in Carrollton

It’s usually the fill valve seal or a mis-seated flapper, not a supply-line issue. In Carrollton’s water, mineral buildup on the fill valve seal is common, and that’s what causes the toilet to re-fill every few minutes. We confirm the exact model first, then swap the correct OEM part. Call (888) 584-9525 for a free estimate.
No, not back to factory fresh. Vibrant PVD finishes are durable but they’re a layer, not solid brass. Once abrasive or acidic cleaners strip that layer around the aerator, the spotting can’t be buffed out. We can replace the trim or the faucet with the matching finish. Call (888) 584-9525 to talk through options.
In most cases, conversion to a walk-in shower is the better answer. A cracked cast-iron base often means water is sitting behind the tile flange, and patching the enamel doesn’t fix the moisture behind it. A walk-in shower base with a proper drain and flange solves the underlying problem. Call (888) 584-9525 for an exact quote.
Archer and Underscore acrylic tubs show up often in Carrollton’s 1970s and 1980s homes. Consider a tub-to-shower conversion when the acrylic base is flexing or cracked at the drain, when there’s a soft spot under the tub, or when a family member needs easier access. Call (888) 584-9525 to schedule a free estimate.
We source the correct Kohler OEM fill valve, flapper, trim kit, or cartridge whenever it’s available. We’re not a Kohler dealer and we don’t stock OEM parts, but we order what fits your model because aftermarket parts often don’t match the seat geometry or finish. Call (888) 584-9525 for a free estimate.
It depends on the job, and these are typical estimated ranges for Carrollton. A tub-to-shower conversion runs $3,500 – $10,000. A walk-in shower install is $4,500 – $12,000. A bathroom vanity install is $800 – $3,000. A full bathroom remodel is $9,000 – $28,000. The written estimate sets the final price. Call (888) 584-9525 for an exact quote.
| Kohler Bathroom Service | Typical Estimated Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Book Your Kohler Service in Carrollton, TX
Call (888) 584-9525 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re an independent service provider for Kohler bathroom fixtures in Carrollton, and we’ll walk you through what needs repair, what needs replacing, and what the written estimate covers. Estimates are free.
Written by the team at Construction Carrollton.












