







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Countertop Installation Cost in Carrollton?
Countertop installation in Carrollton typically costs $2,000 – $6,500, including material and labor for a standard run of cabinets. That range covers most of what we install here. Larger kitchens, islands, and premium stone or quartz pull the project toward the top, while a compact layout or a laminate-to-quartz swap stays near the bottom. The written estimate sets the final price, and the estimate itself is free.
We get this question a lot, and the honest answer is that the number moves with the square footage, the material, and how much edge detail and cutout work the job needs. Read on for the line items and what pushes the total up or down in a Carrollton kitchen.
Key Takeaways
- Typical full installation for a standard kitchen: $2,000 – $6,500.
- Material choice moves the price more than anything else – quartz and natural stone cost more than laminate.
- Cutouts for sinks and cooktops, edge profiles, and island tops add to the base.
- Our technicians have up to 14 years of experience, and we work from a vetted list of 50+ brands including Cambria, Caesarstone, and Silestone.
- Free estimates. Call (888) 584-9525. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Countertop Installation Cost Breakdown (2026)
Here’s how a typical Carrollton countertop project breaks down when we write it up. The material line is the biggest variable, and the labor line scales with square footage and how complex the cuts are.
| Line item | Typical estimated range |
|---|---|
| Countertop fabrication and installation (standard kitchen run) | $2,000 – $4,500 |
| Premium quartz or natural stone material upgrade | $1,200 – $2,500 |
| Kitchen island top | $3,000 – $10,000 (full island install) |
| Backsplash installation | $800 – $2,500 |
| Sink and cooktop cutouts | Included in the base labor on most jobs |
| Edge profile upgrade (bullnose, ogee, beveled) | Quoted per linear foot in the written estimate |
| Old countertop removal and haul-away | Quoted in the written estimate |
Two of those lines – cutouts and removal – we fold into the base labor on most jobs, which is why the total lands inside the $2,000 – $6,500 range instead of above it. A kitchen island is usually priced as its own project because it needs a separate slab or piece, its own fabrication, and often a different support setup. If you’re doing the island at the same time as the main counters, the two travel together and the written estimate reflects that.
What drives the number up: premium stone, a long run of cabinets, several cutouts, and an intricate edge profile. What keeps it down: a compact layout, a mid-range material, and standard edges. We don’t quote a number over the phone and call it final. The written estimate, done after we see the space, sets the price.
What Affects Countertop Installation Pricing in Carrollton
Carrollton has a lot of post-war and 1980s-era housing stock mixed with newer builds, and that mix changes what a countertop job actually involves. Here are the factors that move the number most.
- Square footage and layout. A short galley or a single run of cabinets costs far less than an L-shaped kitchen with a peninsula. The bigger the run, the more slab you buy and the more fabrication time it takes.
- Material choice. Laminate sits at the low end, quartz and natural stone at the high end. We work with Cambria, Caesarstone, and Silestone, among other brands, so you’re choosing from real options rather than whatever happens to be on hand.
- Cutouts and undermount sinks. Every sink, cooktop, and faucet opening is a fabrication step. An undermount sink needs finished interior edges, which adds labor compared to a drop-in.
- Edge profile. A simple eased or square edge is standard. Bullnose, ogee, and beveled profiles take more time and are priced per linear foot.
- Cabinet condition and leveling. In older Carrollton homes, cabinets are sometimes out of level or have settled. Countertops sit on top of whatever is there, so shimming and leveling have to happen first. If the cabinets themselves are tired, it may make sense to address those at the same time – see our cabinet installation work.
- Removal and disposal of the old top. Pulling out and hauling away an existing countertop is extra labor, though it’s often modest.
Dallas County homes around here also deal with intense summer heat, and the sun that comes through a west-facing kitchen window can fade or discolor lower-end materials over time. That’s one practical reason a lot of homeowners here step up to quartz or stone rather than staying with a heat-sensitive laminate.

How to Save on Countertop Installation
There’s no magic discount, but there are real, specific choices that keep a Carrollton countertop project inside the lower half of the range.
- Choose your material with the whole kitchen in mind. Quartz and stone are forgiving and durable, but if the budget is tight, a well-chosen mid-range surface can look right and last. We’ll walk you through the material options so you’re deciding on facts, not guesswork.
- Keep the edge profile simple. A standard edge reads clean and saves fabrication time. Fancy profiles are a want, not a need.
- Consolidate the job. Doing the counters, backsplash, and island in one project means one fabrication run and one installation visit instead of two. Our backsplash installation work pairs naturally with a countertop swap.
- Deal with the cabinets first if they’re failing. New stone on sagging cabinets is money wasted. If leveling isn’t enough, a cabinet project before the counters is the smarter order.
- Get the written estimate before you commit. It’s free, and it sets the final price. Call (888) 584-9525 to schedule one.
One thing worth saying plainly: countertop work isn’t a DIY project for most homeowners. Measuring and fabricating stone so it fits a real kitchen, handling a heavy slab, and cutting for a sink or cooktop safely takes the right tools and experience. A bad cut on stone isn’t fixable – it means a new slab.
Quartz vs. Granite vs. Laminate: What Should You Choose?
For most Carrollton kitchens, quartz is the balanced pick: consistent look, low maintenance, and predictable pricing. Granite offers natural variation and holds up well to heat. Laminate is the value choice and the fastest way to stay near the bottom of the $2,000 – $6,500 range. The right answer depends on how you cook, how long you plan to stay, and what your budget allows.
How Long Does Countertop Installation Take?
Fabrication and installation for a standard kitchen is usually a multi-day process once the material is confirmed, with installation itself typically taking a day. Stone and quartz are templated on site after cabinets are in place, then fabricated, then installed. Laminate can move faster. We’ll give you a realistic timeline in the written estimate so you can plan the kitchen downtime.
Do I Need a Permit for Countertop Installation in Carrollton?
Most countertop swaps don’t require a permit because you’re replacing a surface, not moving plumbing or gas. If the job involves relocating a sink, adding a cooktop, or changing gas lines, that can trigger permit requirements. Check with Carrollton’s building department before you start, and never move a gas line yourself – that’s a job for a licensed professional. We can walk you through what typically needs a permit and what doesn’t. If your project grows into a full kitchen overhaul, our kitchen remodeling team can handle the whole scope, and our small kitchen remodel work is built for compact Carrollton layouts.
Should You Repair or Replace Worn Countertops?
If a countertop is chipped, delaminating, or just outdated across a large area, replacement is almost always the better call – patching rarely matches and often costs a meaningful fraction of a new install anyway. A small chip or a single damaged section can sometimes be repaired. The real deciding factor is how much of the surface is affected. When the damage is widespread or the material is at the end of its life, a new install in the $2,000 – $6,500 range is the more sensible spend.
Why Work With a Single Contractor Across Materials
Countertops don’t exist in a vacuum. In a real kitchen, the counter choice sits next to the cabinetry, the sink and faucet, the backsplash, and sometimes the island. One contractor, every project phase means you’re not handing a half-finished kitchen between a cabinet installer and a countertop fabricator and hoping they agree on measurements. We source from a pool of 50+ vetted brands across seven service lines, so the sink and faucet can come from Kohler, Moen, or Grohe in the same project as the countertop slab. That’s the value – not the cheapest number, but one accountable process and materials that fit together. You can see the full scope of what we do at Construction Carrollton.
And because we also handle bathroom remodeling, roofing, fence installation, driveway and pavers, windows and doors, and home additions and ADU work, a phased plan across the whole house stays with one team. Built to spec, not to budget shortcut.
What Does a Kitchen Island Cost Including the Countertop?
A kitchen island installation in Carrollton typically runs $3,000 – $10,000, and the countertop is part of that number. Island tops are priced separately from the main run because they need their own slab or piece, their own fabrication, and often different support. If you’re adding an island to an existing kitchen, tell us the size and we’ll price the island top within that range.
Countertop Installation Across Carrollton
We install countertops throughout Carrollton, from the older neighborhoods near the historic downtown square to the newer subdivisions along the Dallas North Tollway corridor and around Josey Ranch. If you’re in a nearby city, our countertop installation in Farmers Branch and countertop installation in Addison guides cover the same process and price ranges. For the wider Dallas-area picture, our Dallas countertop installation page and Plano countertop installation page are worth a read.
FAQs – Countertop Installation Cost
How much does countertop installation cost in Carrollton?
Countertop installation in Carrollton typically costs $2,000 – $6,500 for a standard kitchen, including material and labor. Premium stone, islands, and complex edges push toward the top of that range, while a compact layout and mid-range material keep it near the bottom. Call (888) 584-9525 for an exact quote – estimates are free.
Is it cheaper to repair or replace countertops?
Replacing is usually cheaper than repairing when the damage covers a large area or the material is failing across the whole surface. Small chips or a single damaged section can be repaired. If most of the top is affected, a new install at $2,000 – $6,500 is the more sensible spend. Call (888) 584-9525 and we’ll help you decide.
How much does a kitchen island cost in Carrollton?
A kitchen island installation in Carrollton typically runs $3,000 – $10,000, including the countertop. The number depends on size, the material, and whether the island needs its own support. Call (888) 584-9525 for a written estimate – it’s free.
How much does a backsplash cost?
Backsplash installation in Carrollton typically costs $800 – $2,500. Tile choice, the size of the wall area, and whether it’s done alongside a countertop swap all affect the price. Pairing it with countertops keeps the project to one install visit. Call (888) 584-9525 for a free estimate.
Can you install countertops the same day?
Same-day installation isn’t usually possible for stone and quartz, because those materials are templated, fabricated, and then installed – a process that takes multiple days. Laminate can move faster. Once fabrication is done, install itself typically takes a day. Call (888) 584-9525 to get a realistic timeline and a free estimate.
What’s the cheapest countertop material?
Laminate is the least expensive countertop material and keeps a Carrollton project near the bottom of the $2,000 – $6,500 range. Quartz and natural stone cost more but last longer and need less upkeep. We work from a list of 50+ brands, so you can compare real options side by side. Call (888) 584-9525.
Do you handle cabinet installation too?
Yes. Cabinet installation in Carrollton typically runs $4,000 – $13,000, and doing cabinets and countertops together means one measurement pass and one accountable contractor. New stone on failing cabinets is money wasted, so we look at both. Call (888) 584-9525 to start your kitchen material consultation.
Start Your Kitchen Material Consultation
Pricing a countertop is the easy part once you have real numbers in front of you. The harder part is choosing a material that fits your kitchen, your cooking, and your budget, and then having it installed correctly the first time. That’s what we do. We’ll walk you through the material options, measure the space, and write an estimate that sets the final price. Our technicians have up to 14 years of experience, the local professionals we connect you with are licensed and insured as their state requires, and the estimate is free.
Call (888) 584-9525. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day estimates are often available, and the written estimate is what sets the final price.
Written by the team at Construction Carrollton.
Pricing reflects the Carrollton market as of 2026. Construction Carrollton offers free estimates – call (888) 584-9525.
What Our Customers Say
"Ground up build. Permits, foundation, framing, all of it, and he ran the schedule tightly enough that the subs were never tripping over each other. Finished within a month of a fourteen month estimate."
- Brian Quinn"Every inspection passed first time. The building department clearly knows him and that made the whole process easier."
- Maria Flores"The framing was meticulous and the walls are straight everywhere. Drywall goes on a lot better when the framing is right."
- Rosa Ramirez












