







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Carrollton Homeowners
If your fence is sagging, leaning, or missing boards after years of North Texas heat and clay soil, a full replacement usually costs less over time than patching it every season. We connect Carrollton homeowners with independent local fencing professionals who install wood, vinyl, aluminum, chain link, and iron fences built for this region’s heavy clay ground and hot summers. Our technicians have up to 14 years of experience, and the local pros we work with are licensed and insured as Texas requires. Free estimates come with a written line-item quote, so you know the materials, the layout, and the price before anything gets dug. For fence work that can’t wait, call (888) 584-9525. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Fence Installation Service Includes
Every fence is a boundary, a privacy screen, and a piece of the home’s exterior, and it should be chosen and set the same way. Here’s what each type of fence work covers when a Carrollton homeowner books with us.
Wood Fence
Wood fencing is the most common choice in Carrollton, largely because cedar and treated pine handle the local heat well and can be stained to match a home’s exterior. It’s the right pick when you want a warm, traditional look and a privacy fence at a lower material cost than vinyl or metal. We install from Barrette and other vetted cedar and pine lines, set posts in proper concrete footings to account for the expansive clay soil, and rack panels to grade so the fence follows the lot without gaps or floating boards.

Chain Link Fence
Chain link is the practical answer for a backyard that needs to contain a dog or mark a clear property line without blocking light or air. It’s fast to install, holds up to weather, and costs less than almost any other fence type. We install galvanized and vinyl-coated chain link from Master Halco, with tension wire, tie-downs, and post spacing chosen for the property rather than whatever’s fastest, so the mesh stays taut instead of sagging within a year.

Vinyl Fence
Vinyl fencing gives you the privacy of wood without the painting or the rot, and it holds its color through Carrollton’s sun. It’s a strong fit for homeowners who want a clean, uniform look that won’t need refinishing. Our vinyl installs typically run $3,500 – $9,000 depending on linear footage, height, and gate count, and we set the panels on posts rated for wind and heat so the fence doesn’t bow or fade prematurely.

Aluminum Fence
Aluminum fencing is the go-to for pool areas, front yards, and any spot where you want a boundary that looks sharp without blocking the view. It doesn’t rust, it’s light enough to install cleanly, and rackable panels follow a sloped yard. Aluminum installation from us typically runs $4,000 – $10,000, and we install from Ameristar’s ornamental lines with welded or racked panels, powder-coated finishes, and self-closing gate hardware where safety or code requires it.
Iron Fence
Wrought iron and ornamental steel give a property a heavier, classic look that aluminum can’t fully match, and they’re a common choice for custom gates and street-facing boundaries. Iron is the right pick when you want permanence and are willing to accept a higher material cost and a heavier installation. We install ornamental iron from Jerith, matching the picket style and finish to the home, and we anchor posts and hinges so gates swing true for years.
Fence Repair
Not every fence needs replacing. A leaning post, a broken gate, a single rotten section, or a storm-loosened panel is usually a repair, and we’ll tell you honestly when it is. We repair wood, vinyl, aluminum, and chain link, replacing damaged sections, resetting posts, and fixing gate hardware rather than pushing a full replacement you don’t need. If the fence is more than a few panels gone, the estimate will lay out both the repair and the replacement option so you can compare.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with a defined set of commercial-grade fence manufacturers, the same names specified for commercial and high-security installations. Barrette is the backbone of our wood and vinyl work, and we know how their cedar and composite lines wear under Carrollton sun and clay. We set posts, rails, and pickets to the manufacturer’s specifications so the fence performs the way it’s designed to, not the way it’s cheapest to install.
For metal, Master Halco covers our chain link needs and Ameristar handles ornamental aluminum, so we can match the right system to the job instead of forcing one material onto every property. Jerith’s ornamental iron rounds out our lineup for heavier, custom-look fencing. Whether you have an existing Barrette, Master Halco, Ameristar, or Jerith fence that needs repair or you’re starting fresh, we can help.
Signs You Need Fence Installation Right Now
- Posts are leaning or loose. If you can push a post and feel it move, the footing has failed or the soil has shifted around it, and the whole run will follow. A leaning post is the first sign the fence is past salvage.
- Boards are rotting, warping, or missing. Wood that crumbles at the base or pops loose after rain won’t hold a nail for long. Once sections go, patching becomes a yearly chore and the fence stops doing its job.
- A gate won’t close or drags on the ground. A sagging gate usually means a failing hinge or post, and it’s a safety problem for kids and pets. If it won’t latch, it needs attention now, not next season.
- The fence is no longer private or secure. Gaps, missing pickets, or rusted-through chain link let neighbors see in and let pets out. That’s the point where a repair quote and a replacement quote should both be on the table.
- A storm or tree branch took out a section. North Texas wind and falling limbs are hard on fences. A damaged run is worth replacing cleanly rather than bracing with whatever’s on hand.
Our Fence Installation Process – Step by Step
- 1
Free on-site estimate and consultation. We walk the property with you, talk through materials and brands, and measure the actual run, including gates and corners. You get a written line-item quote with materials and labor spelled out, and the written estimate sets the final price.
- 2
Layout and utility check. We mark the fence line and confirm the property boundary, and we ask you to call 811 so buried utilities are flagged before anyone digs. Post spacing and gate openings get set on the ground before a hole is dug.
- 3
Post setting. Posts are set in concrete footings sized for the soil and the fence height. In Carrollton’s clay, that’s where cheap installs fail first, so this step gets the time it needs.
- 4
Panel and gate installation. Panels, rails, and pickets go up to the manufacturer’s specifications, and gates are hung to swing clean and latch. We check plumb, level, and grade as we go rather than at the end.
- 5
Final walkthrough and cleanup. We walk the fence with you, check gates and hardware, and clear the site. Permits, where the city requires them, are pulled before work starts so the install passes inspection without a second visit.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Carrollton?

A typical vinyl fence installation in Carrollton runs $3,500 – $9,000 depending on linear footage, height, and how many gates you need. A typical aluminum fence installation runs $4,000 – $10,000, with ornamental styles and custom gates pushing toward the top of the range. Those are estimated ranges, and your written estimate sets the final price.
Several things move the number. Linear footage is the biggest driver, followed by fence height, material choice, and gate count. Terrain matters too: a sloped or heavily rooted lot takes more footing work than a flat one. Removing an old fence adds labor, and so do tight side yards where material has to be carried in by hand.
To avoid overpaying, get the quote in writing with materials named and waste haul-away included, and ask what the price covers if the ground turns out harder than expected. A free estimate from us includes measurements, a material walkthrough, and a written line-item price with no change orders once work starts. Call (888) 584-9525 for an exact quote. Estimates are free.
Fence Installation Near Carrollton – Our Service Area
We handle fence installation across Carrollton and the surrounding cities, including Coppell, Lewisville, The Colony, Irving, Grapevine, Highland Village, Flower Mound, Little Elm, Euless, Lantana, and Corinth. We know the clay, the wind, and the lot lines in each of these, and we schedule visits the same way across the whole area. If you’re comparing options nearby, our fence installation and fence installation pages cover the specifics for those cities. You can also see everything we do on our Construction Carrollton page.
Serving Carrollton, TX – Our Local Coverage Area
We serve Carrollton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Carrollton

Fence installation is the full build of a new fence: setting posts in concrete footings, hanging rails and panels, installing gates, and finishing the run to your property line. It covers material selection, layout, digging, and cleanup, not just the panels themselves. We handle the whole scope with one contractor and a written estimate. Call (888) 584-9525 for a free quote.
Most residential fence installs take one to three days once materials are on site, depending on footage and gate count. A short chain link run can go in a day, while a long privacy fence with multiple gates takes longer. Weather and utility marking can add time. We’ll give you a realistic timeline with the estimate.
Vinyl fence installation typically runs $3,500 – $9,000, and aluminum typically runs $4,000 – $10,000, depending on footage, height, and gates. Wood and chain link can land below or within those ranges depending on material grade. The written estimate sets the final price. Call (888) 584-9525 for an exact quote. Estimates are free.
Yes. We install from Barrette for wood and vinyl, Master Halco for chain link, Ameristar for ornamental aluminum, and Jerith for ornamental iron. We also repair existing fences from these brands when a full replacement isn’t needed. Tell us what you have or want, and we’ll match the material to your property.
Same-day service is available for fence repairs when the schedule allows. We answer 24/7 at (888) 584-9525, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Saturday is closed.
Workmanship warranty terms are set in your written estimate before work starts, and material warranties come from the manufacturer. We’ll spell out exactly what’s covered and for how long when we quote the job. Ask about the terms during the estimate so there are no surprises later.
Clear the fence line of furniture, planters, and anything movable, and call 811 to have buried utilities marked before digging. Trim back any branches or shrubs along the run. Tell us about sprinkler lines, invisible dog fences, or drains you know are buried so we plan around them. Call (888) 584-9525 to schedule your free estimate.
Schedule Your Fence Installation Service in Carrollton Today
Ready to replace a failing fence or add privacy to your Carrollton yard? Call (888) 584-9525 for a free, no-obligation estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. You’ll get a written line-item quote, a clear material recommendation, and a single contractor from the driveway to the roofline. That’s the advantage of a company that also handles fence installation alongside pavers, windows, roofing, and remodels, so one team can see your whole property through.
Written by the team at Construction Carrollton.












